日本三级片在线观看,亚洲色在线无码国产精品不卡,精品人妻av无码一区二区三区,国产乱xxxxx97国语对白

歡迎來上海碩光電子科技有限公司!

產品名稱:High Speed Bench Centrifuge

產品型號:SG-850

更新時間:2019-05-05

廠商性質:生產廠家

訪問次數:2479

產品報價:

產品特點:SG-850 is a conventional high-speed desktop centrifuge laboratory centrifuges, micro samples to meet the needs of rapid separation of synthetic production of a new generation of centrifuge R & D products

產品詳細資料:

Products Introduction:
SG-850 is a conventional high-speed desktop centrifuge laboratory centrifuges, micro samples to meet the needs of rapid separation of synthetic production of a new generation of centrifuge R & D products,widely used in biology, chemistry, medicine, education and scientific research and production departments. Maximum speed of 16000r/min, applied micro fast separation of synthetic samples.

Features:
1.attractive appearance, small size, fully functional。
2.Stable performance、adjustable speed and automatically adjust the balance
3.Use low temperature, high efficiency, wide adaptability
4.The products are suitable for pharmaceutical products, blood banks, clinical trials, and biochemical laboratories for serum, plasma, urea qualitative analysis.


Specifications:
Maximum speed:16000r/min
Centrifugal force:17000g
Capacity:1.5ml*12、 0.5ml*12
Timing:0-60min
Noise:70db
Power:250w
Dimensions (mm) l * w * h:220*220*280


Handling Precautions
Work in a high speed centrifuge, used to safety and to ensure that the equipment to maintain high precision work, we must do the following:
(1).Centrifuges used to be placed in a smooth, strong on the counter; centrifuge work done, the load balancing, the weight error as small as possible, otherwise it will cause severe vibration, and shaft damage the centrifuge turned。
(2).Centrifuge starts, switch knob should be on the low speed position, start and then gradually adjust to the desired value. A work, shall knob again transferred to low-bit work, at high speed block ban on direct start.
(3).Rotor in the strict inspection before each use if a foreign body and the dirt hole, in order to maintain balance. Turned around and must be kept dry and clean, do not impact abrasion. Such as accidentally dropped, turned to X-ray film should check that no internal injury can continue to use. Turned after each use with warm water (50 Degrees -60 Degrees) and neutral detergent immersion cleaning, and finally with distilled or deionized water rinse, soft cloth after drying with hair dryer, wax, dry place.
(4).Pull all kinds of tube length, strength and stretch are different, should the need to use, the tube can be made of many different materials, such as polyethylene, cellulose, polycarbonates, polypropylene. Use care to ensure the sample, non-corrosive materials, solvent and gradient centrifuge tube and cap components. Expired, the aging, there are cracks or corrosion of the tube by minimizing or spin-down use. Control the use of plastic tube number, pay attention to standard matching. Centrifugal process may open the centrifuge lid, not by hand or foreign body collisions are turned and the rotation of the centrifuge tube.
(5).In the centrifuge process, such as abnormal phenomena, such as the noise and vibration is not normal, should immediay stop checks, not to find reasons not to continue to operate .
(6).Daily use of centrifuges in the process, every three months the level of response to host a degree of correction for each transfer using 500 million deal with a vacuum pump oil, working 500h should check drive motor carbon brush, preferably with a vacuum cleaner to friction toner remove, if necessary, to replace carbon brushes or commutator with fine sandpaper polish。Should be cleaned about every driver using the 1500h site with high-speed bearings and grease shaft and turned rust-proof joint of fat should be kept painted, do not be long-term anti-rust oil coating oil paper wrap. When not in use should be switched each month low 1 or 2 times, each time 0.5h, to ensure the normal operation of the site.
(7). Be sure to place the centrifuge tube placed symmetrically, and to keep the weight fairly. Things in the open centrifuge to centrifuge lid.
(8). Centrifugal liquid should not be too low boiling point,Should pay attention to internal and external pressure ratio.If it is toxic reagents, but also good ventilation treatment.
 

 相關同類產品:

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7

上海碩光電子科技有限公司 版權所有

ICP備案號:滬ICP備14032911號-5 管理登陸 技術支持:化工儀器網   總流量:477678  sitemap.xml

在線客服
  • 劉先生

    021-65682142

    13816422470

在線客服
用心服務 成就你我
国产精品成熟老女人| 免费观看成人欧美WWW色| 亚洲日本无码一区二区三区四区卡| 久久久99精品成人片中文字幕 | 无码人妻一区二区三区免费手机| 国产精品久久久久久久久免费 | 无人区码一码二码W358CC| 性色av色香蕉一区二区蜜桃| a级春药情欲片在线观看bdo| 永久免费av无码网站韩国毛片| 久久精品99国产国产精| 亚洲处破女 WWW| 国产精品嫩草影院| 亚洲精品深夜av无码一区二区| 专干老熟女视频在线观看| 无码人妻精一区二区三区| 狠狠色噜噜狠狠狠8888米奇| 精品无码一区二区三区| 大又大又粗又硬又爽少妇毛片| 亚洲欧美国产精品专区久久| 凹凸国产熟女精品视频国语| 成人男女av片在线观看| 亚洲精品毛A片久久久| 在线观看免费播放av片| 国产免费视频| 人妻体验按摩调情BD| 乱人伦人妻中文字幕无码| 亚洲精品无码久久久| 国产成A人亚洲精V品久久网| 艳妇荡岳丰满交换做爰| 欧产日产国产精品| 日日噜噜噜噜夜夜爽亚洲精品 | 蜜臀av在线播放| 国产麻豆一区二区三区精品视频 | 八戒八戒神马在线电影免费 | 无码国内精品人妻少妇蜜桃视频| 国产产无码乱码精品久久鸭| 免费精品99久久国产综合精品| 亚洲av无码国产精品色| 九月婷婷人人澡人人添人人爽| 亚洲精品一区二区三区四区五区|